Civil Technology Grade 12 Term 4 November Past Papers and Memos

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Construction Associated with Civil Services, Ohsa and Quantities (Specific) 30 marks
4. Q4 Cold and Hot-Water Supply, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Graphics As Means of Communication, Roof Work and Storm Water (Specific) 30 marks
6. Q6 Sewerage, Sanitary Fittings and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should: • Familiarise themselves with the question and answer before evaluating the responses of candidates. • Always interpret the responses of the candidates within the context of the question. • Consider any relevant and acceptable answer during pre
2. If a candidate is required to explain e.g., a process in a prescribed number of steps (e.g. 3 steps), only the first required number of responses should be considered.
3. However, if for example candidate is required to explain or describe a process, we need to consider that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if the c
4. Bullet Form Answers: When a candidate provides their answers in bulleted points, each bullet should be treated as a single answer. Award 1 mark for each complete bulleted response.
5. Paragraph Form Answers: When a candidate provides answers in paragraph form, the response should be evaluated based on the accuracy and completeness of each fact presented. Award marks for each distinct fact or point made, ensuring that each fact is correctly
6. For calculations: • A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will be awarded even if the answer is indicated without the unit. • Marks will only be alloc
7. When marking drawings: • The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark. • A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc
8. Incorrect numbering of questions: • If a candidate numbered incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle the incorrect numbering and mark the response. • If questions were answe
9. Duplication of responses and questions answered in the correct place: • If a question is answered twice, mark the first response. • If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answer boo

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Roofs, Staircases and Joining (Specific) 30 marks
4. Q4 Excavations, Formwork, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Plaster and Screed, Brickwork and Graphics As Means of Communication (Specific) 30 marks
6. Q6 Reinforcement in Concrete, Foundations, Concrete Floors and Quantities (Specific) 40 marks

Instructions to candidates

1. Markers should: • Familiarise themselves with the question and answer before evaluating the responses of candidates. • Always interpret the responses of the candidates within the context of the question. • Consider any relevant and acceptable answer during pre
2. If a candidate is required to explain e.g., a process in a prescribed number of steps (e.g. 3 steps), only the first required number of responses should be considered.
3. However, if for example candidate is required to explain or describe a process, we need to consider that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if the c
4. Bullet Form Answers: When a candidate provides their answers in bulleted points, each bullet should be treated as a single answer. Award 1 mark for each complete bulleted response.
5. Paragraph Form Answers: When a candidate provides answers in paragraph form, the response should be evaluated based on the accuracy and completeness of each fact presented. Award marks for each distinct fact or point made, ensuring that each fact is correctly
6. For calculations: • A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will be awarded if the answer is indicated without the unit. • Marks will only be allocated
7. When marking drawings: • The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark. • A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc
8. Incorrect numbering of questions: • If a candidate numbered incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle the incorrect numbering and mark the response. • If questions were answe
9. Duplication of responses and questions answered in the correct place: • If a question is answered twice, mark the first response. • If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answer boo

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Cupboards, Casements 30 marks
4. Q4 Roofs, Ceilings, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Centering, Formwork, Shoring and Graphics As Means of Communication (Specific) 30 marks
6. Q6 Suspended Floors, Staircases, Ironmongery, Doors and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should: • Familiarise themselves with the question and answer before evaluating the responses of candidates. • Always interpret the responses of the candidates within the context of the question. • Consider any relevant and acceptable answer during pre
2. If a candidate is required to explain e.g., a process in a prescribed number of steps (e.g. 3 steps), only the first required number of responses should be considered.
3. However, if for example candidate is required to explain or describe a process, we need to consider that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if the c
4. Bullet Form Answers: When a candidate provides their answers in bulleted points, each bullet should be treated as a single answer. Award 1 mark for each complete bulleted response.
5. Paragraph Form Answers: When a candidate provides answers in paragraph form, the response should be evaluated based on the accuracy and completeness of each fact presented. Award marks for each distinct fact or point made, ensuring that each fact is correctly
6. For calculations: • A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will be awarded if the answer is indicated without the unit. • Marks will only be allocated
7. When marking drawings: • The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark. • A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc
8. Incorrect numbering of questions: • If a candidate numbered incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle the incorrect numbering and mark the response. • If questions were answe
9. Duplication of responses and questions answered in the correct place: • If a question is answered twice, mark the first response. • If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answer boo

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Construction Associated with Civil Services, Ohsa and Quantities (Specific) 30 marks
4. Q4 Cold- and Hot-Water Supply, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Graphics As Means of Communication, Roof Work and Storm Water (Specific) 30 marks
6. Q6 Sewerage, Sanitary Fittings and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should: • Familiarise themselves with the question and answer before evaluating the responses of candidates. • Always interpret the responses of the candidates within the context of the question. • Consider any relevant and acceptable answer during pre
2. If a candidate is required to explain e.g., a process in 4 steps, only the first 4 responses should be considered.
3. However, if for example candidate is required to explain or describe a process, we need to consider that that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if
4. For calculations: • A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question. • Mark
5. When marking drawings: • The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark. • A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc
6. Incorrect numbering of questions: • If a candidate numbered an incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle then the incorrect numbering and mark the response. • If questions we
7. Duplication of responses and questions answered in the correct place: • If a question is answered twice, mark the first response. • If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answer boo

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Roofs, Staircases and Joining (Specific) 30 marks
4. Q4 Excavations, Formwork, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Plaster and Screed, Brickwork and Graphics As Means of Communication (Specific) 30 marks
6. Q6 Reinforcement in Concrete, Foundations, Concrete Floors and Quantities (Specific) 40 marks

Instructions to candidates

1. Markers should: • Familiarise themselves with the question and answer before evaluating the responses of candidates. • Always interpret the responses of the candidates within the context of the question. • Consider any relevant and acceptable answer during pre
2. If a candidate is required to explain e.g., a process in 4 steps, only the first 4 responses should be considered.
3. However, if for example candidate is required to explain or describe a process, we need to consider that that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if
4. For calculations: • A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question. • Mark
5. When marking drawings: • The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark. • A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc
6. Incorrect numbering of questions: • If a candidate numbered an incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle then the incorrect numbering and mark the response. • If questions we
7. Duplication of responses and questions answered in the correct place: • If a question is answered twice, mark the first response. • If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answer boo

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Cupboards, Casements 30 marks
4. Q4 Roofs, Ceilings, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Centering, Formwork, Shoring and Graphics As Means of Communication (Specific) 30 marks
6. Q6 Suspended Floors, Staircases, Ironmongery, Doors and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should: • Familiarise themselves with the question and answer before evaluating the responses of candidates. • Always interpret the responses of the candidates within the context of the question. • Consider any relevant and acceptable answer during pre
2. If a candidate is required to explain e.g., a process in 4 steps, only the first 4 responses should be considered.
3. However, if for example candidate is required to explain or describe a process, we need to consider that that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if
4. For calculations: • A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question. • Mark
5. When marking drawings: • The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark. • A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc
6. Incorrect numbering of questions: • If a candidate numbered an incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle then the incorrect numbering and mark the response. • If questions we
7. Duplication of responses and questions answered in the correct place: • If a question is answered twice, mark the first response. • If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answer boo

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Construction Associated with Civil Services, Ohsa and Quantities (Specific) 30 marks
4. Q4 Cold- and Hot-Water Supply, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Graphics As Means of Communication, Roof Work and Storm Water (Specific) 30 marks
6. Q6 Sewerage, Sanitary Fittings and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should: • Familiarise themselves with the question and answer before evaluating the responses of candidates. • Always interpret the responses of the candidates within the context of the question. • Consider any relevant and acceptable answer during pre
2. If a candidate is required to explain e.g., a process in 4 steps, only the first 4 responses should be considered.
3. However, if for example candidate is required to explain or describe a process, we need to consider that that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if
4. For calculations: • A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question. • Mark
5. When marking drawings: • The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark. • A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc
6. Incorrect numbering of questions: • If a candidate numbered an incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle then the incorrect numbering and mark the response. • If questions we
7. Duplication of responses and questions answered in the correct place: • If a question is answered twice, mark the first response. • If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answer boo

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Roofs, Staircases and Joining (Specific) 30 marks
4. Q4 Excavations, Formwork, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Plaster and Screed, Brickwork and Graphics As Means of Communication (Specific) 30 marks
6. Q6 Reinforcement in Concrete, Foundations, Concrete Floors and Quantities (Specific) 40 marks

Instructions to candidates

1. Markers should: • Familiarise themselves with the question and answer before evaluating the responses of candidates. • Always interpret the responses of the candidates within the context of the question. • Consider any relevant and acceptable answer during pre
2. If a candidate is required to explain e.g., a process in 4 steps, only the first 4 responses should be considered.
3. However, if for example candidate is required to explain or describe a process, we need to consider that that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if
4. For calculations: • A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question. • Mark
5. When marking drawings: • The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark. • A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc
6. Incorrect numbering of questions: • If a candidate numbered an incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle then the incorrect numbering and mark the response. • If questions we
7. Duplication of responses and questions answered in the correct place: • If a question is answered twice, mark the first response. • If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answer boo

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Cupboards, Casements 30 marks
4. Q4 Roofs, Ceilings, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Centering, Formwork, Shoring and Graphics As Means of Communication (Specific) 30 marks
6. Q6 Suspended Floors, Staircases, Ironmongery, Doors and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should: • Familiarise themselves with the question and answer before evaluating the responses of candidates. • Always interpret the responses of the candidates within the context of the question. • Consider any relevant and acceptable answer during pre
2. If a candidate is required to explain e.g., a process in 4 steps, only the first 4 responses should be considered.
3. However, if for example candidate is required to explain or describe a process, we need to consider that that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if
4. For calculations: • A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question. • Mark
5. When marking drawings: • The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark. • A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc
6. Incorrect numbering of questions: • If a candidate numbered an incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle then the incorrect numbering and mark the response. • If questions we
7. Duplication of responses and questions answered in the correct place: • If a question is answered twice, mark the first response. • If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answer boo

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Construction Associated with Civil Services, Ohsa and Quantities (Specific) 30 marks
4. Q4 Cold and Hot-Water Supply, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Graphics As Means of Communication, Roof Work and Storm Water (Specific) 30 marks
6. Q6 Sewerage, Sanitary Fittings and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should:  Familiarise themselves with the question and answer before evaluating the responses of candidates.  Always interpret the responses of the candidates within the context of the question.  Consider any relevant and acceptable answer during pre
2. If a candidate is required to explain e.g., a process in 4 steps, only the first 4 responses should be considered.
3. However, if for example candidate is required to explain or describe a process, we need to consider that that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if
4. For calculations:  A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question.  Mark
5. When marking drawings:  The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark.  A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc
6. Incorrect numbering of questions:  If a candidate numbered an incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle then the incorrect numbering and mark the response.  If questions we
7. Duplication of responses and questions answered in the correct place:  If a question has been answered twice, mark the first response.  If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answ

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Roofs, Staircases and Joining (Specific) 30 marks
4. Q4 Excavations, Formwork, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Plaster and Screed, Brickwork and Graphics As Means of Communication (Specific) 30 marks
6. Q6 Reinforcement in Concrete, Foundations, Concrete Floors and Quantities (Specific) 40 marks

Instructions to candidates

1. Markers should:  Familiarise themselves with the question and answer before evaluating the responses of candidates.  Always interpret the responses of the candidates within the context of the question.  Consider any relevant and acceptable answer during pre
2. If a candidate is required to explain e.g., a process in 4 steps, only the first 4 responses should be considered.
3. However, if for example candidate is required to explain or describe a process, we need to consider that that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if
4. For calculations:  A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question.  Mark
5. When marking drawings:  The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark.  A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc
6. Incorrect numbering of questions:  If a candidate numbered an incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle then the incorrect numbering and mark the response.  If questions we
7. Duplication of responses and questions answered in the correct place:  If a question has been answered twice, mark the first response.  If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answ

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Cupboards, Casements, Wall-Panelling and Quantities (Specific) 30 marks
4. Q4 Roofs, Ceilings, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Centering, Formwork, Shoring and Graphics As Means of Communication (Specific) 30 marks
6. Q6 Suspended Floors, Staircases, Ironmongery, Doors and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should:  Familiarise themselves with the question and answer before evaluating the responses of candidates.  Always interpret the responses of the candidates within the context of the question.  Consider any relevant and acceptable answer during pre
2. For calculations:  A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question.  Mark
3. When marking drawings:  The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark.  A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc
4. Incorrect numbering of questions:  If a candidate numbered an incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle then the incorrect numbering and mark the response.  If questions we
5. Duplication of responses and questions answered in the correct place:  If a question has been answered twice, mark the first response.  If a question should be answered on an answer sheet and the candidate answered it on both the answer sheet and in the answ

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Construction Associated with Civil Services, Ohsa and Quantities (Specific) 30 marks
4. Q4 Cold and Hot Water Supply, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Graphics As Means of Communication, Roof Work and Storm Water (Specific) 30 marks
6. Q6 Sewerage, Sanitary Fittings and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should:  Familiarise themselves with the question and answer before evaluating responses from candidates.  Always interpret the responses of the candidates within the context of the question.  Consider any relevant and acceptable answer during pre-m
2. If a candidate is required to explain a process in a specific number of steps, only the first required number of responses should be considered.
3. However, if for example a candidate is required to explain or describe a process, we need to consider that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if the
4. For calculations:  A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question. Civil
5. When marking drawings:  The member for which the mark should be awarded must be drawn correctly in the correct position to receive a mark.  A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated incor

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic) 2 marks
3. Q3 Roofs, Staircases and Joining (Specific) 30 marks
4. Q4 Excavations, Formwork, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Plaster and Screed, Brickwork and 30 marks
6. Q6 Reinforcement in Concrete, Foundations, Concrete Floors and Quantities (Specific) 40 marks

Instructions to candidates

1. Markers should:  Familiarise themselves with the question and answer before evaluating responses from candidates.  Always interpret the responses of the candidates within the context of the question.  Consider any relevant and acceptable answer during pre-m
2. If a candidate is required to explain a process in a specific number of steps, only the first required number of responses should be considered.
3. However, if for example a candidate is required to explain or describe a process, we need to consider that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if the
4. For calculations:  A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question.  Mark
5. When marking drawings:  The member for which the mark should be awarded must be drawn correctly in the correct position to receive a mark.  A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated incor
6. Incorrect numbering of questions:  If a candidate numbered an answer incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle the incorrect numbering and mark the response.  If questions

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Cupboards, Casements, Wall-Panelling and Quantities (Specific) 30 marks
4. Q4 Roofs, Ceilings, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Centering, Formwork, Shoring and Graphics As 30 marks
6. Q6 Suspended Floors, Staircases, Ironmongery, Doors and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should:  Familiarise themselves with the question and answer before evaluating responses from candidates.  Always interpret the responses of the candidates within the context of the question.  Consider any relevant and acceptable answer during pre-m
2. If a candidate is required to explain a process in a specific number of steps, only the first required number of responses should be considered.
3. However, if for example a candidate is required to explain or describe a process, we need to consider that candidates may write a long description, not necessarily well organised. In this case the marker needs to evaluate the complete statement to judge if the
4. For calculations:  A mark is only awarded if the correct unit is written next to the answer. If the question states that the answer must be in a specific unit, a mark will ONLY be awarded if the answer has the correct unit as indicated in the question.  Mark
5. When marking drawings:  The member for which the mark should be awarded must be drawn correctly in the correct position to receive a mark.  A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated incor
6. Incorrect numbering of questions:  If a candidate numbered an answer incorrectly, but the answer is in the correct position according to the sequence of the questions in the question paper, circle the incorrect numbering and mark the response.  If questions

1. Q1 Ohsa, Safety, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Construction Associated with Civil Services, Ohsa and Quantities (Specific) 30 marks
4. Q4 Hot- and Cold-Water Supply, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Graphics As Means of Communication, Roof Work and Storm Water (Specific) 30 marks
6. Q6 Sewerage, Sanitary Fittings and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should:  Familiarise themselves with the question and answer before evaluating the responses of candidates.  Always interpret the responses of the candidates within the context of the question.  Consider any relevant and acceptable answer during pre
2. For calculations:  A mark is only awarded if the correct unit is written next to the answer.  If TWO marks are awarded, ONE mark is awarded for the answer and ONE mark for the correct unit.  Where the candidate made a principle error, e.g. use an incorrect
3. When marking drawings:  The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark.  A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc

1. Q1 Wbgv, Veiligheid, Materiaal, Gereedskap, Toerusting en Hegting (Generies)1.1 Gee EEN woord/term vir elk van die volgende beskrywings deur 'n 20 marks
2. Q2 Grafika As Kommunikasiemiddel (Generies)FIGUUR A en B op die volgende bladsy toon verskillende tekeninge wat op 'n bouplan 40 marks
3. Q3 Dakke, Trappe en Verbinding/Hegting (Spesifiek)3.1 Noem EEN balustrade-patroon. (1) 30 marks
4. Q4 Uitgrawings, Bekisting, Gereedskap, Toerusting en Materiaal (Spesifiek)4.1 Kies 'n beskrywing uit KOLOM B wat by 'n item in KOLOM A pas. Skryf 40 marks
5. Q5 Pleister en Vlaklaag, Steenwerk en Grafika As Kommunikasiemiddel (Spesifiek)5.1 Die prentjies in FIGUUR 5.1 hieronder toon stappe van 'n bouproses. 30 marks
6. Q6 Wapening in Beton, Fondasies, Betonvloere en Hoeveelhede (Spesifiek)6.1 Verskeie opsies word as moontlike antwoorde op die volgende vrae gegee. 40 marks

Instructions to candidates

1. This question paper consists of SIX questions.
2. Answer ALL the questions.
3. Read all questions carefully.
4. Answer each question as a whole. Do NOT separate subsections of questions.
5. Number the answers correctly according to the numbering system used in this question paper.
6. Start the answer to EACH question on a NEW page.
7. Do NOT write in the margins of the ANSWER BOOK.
8. You may use sketches to illustrate your answers.
9. Write ALL calculations and answers in the ANSWER BOOK or on the attached ANSWER SHEETS.
10. Use the mark allocation as a guide to the length of your answers.
11. Make drawings and sketches in pencil, fully dimensioned and neatly finished off with descriptive titles and notes to conform to the SANS/SABS Code of Practice for Building Drawings.
12. For the purpose of this question paper, the size of a brick should be taken as 220 mm x 110 mm x 75 mm.
13. Use your own discretion where dimensions and/or details have been omitted.
14. Answer QUESTIONS 2, 3.13, 3.14, 6.5, 6.6 and 6.9 on the attached ANSWER SHEETS using drawing instruments, where necessary.

1. Q1 Ohsa, Safety, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Cupboards, Casements, Wall-Paneling and Quantities (Specific) 30 marks
4. Q4 Roofs, Ceilings, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Centering, Formwork, Shoring and Graphics As Means of Communication (Specific) 30 marks
6. Q6 Suspended Floors, Staircases, Ironmongery, Doors and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should:  Familiarise themselves with the question and answer before evaluating the responses of candidates.  Always interpret the responses of the candidates within the context of the question.  Consider any relevant and acceptable answer during pre
2. For calculations:  A mark is only awarded if the correct unit is written next to the answer.  If TWO marks are awarded, ONE mark is awarded for the answer and ONE mark for the correct unit.  Where the candidate made a principle error, e.g. use an incorrect
3. When marking drawings:  The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark.  A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc

1. Q1 Ohsa, Safety, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Construction Associated with Civil Services, Ohsa, and Quantities (Specific) 30 marks
4. Q4 Hot- and Cold-Water Supply, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Graphics As Means of Communication, Roof Work and Storm Water (Specific) 30 marks
6. Q6 Sewerage, Sanitary Fittings and Joining (Specific) 40 marks

Instructions to candidates

1. Markers should:  Familiarise themselves with the question and answer before evaluating the responses of candidates.  Always interpret the responses of the candidates within the context of the question.  Consider any relevant and acceptable answer during pre
2. For calculations:  A mark is only awarded if the correct unit is written next to the answer.  If TWO marks are awarded ONE mark is awarded for the answer and ONE mark for the correct unit.  Where the candidate made a principle error e.g. added instead of mu
3. When marking drawings:  The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark.  A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc

1. Q1 Ohsa, Safety, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Roofs, Staircases and Joining (Specific) 30 marks
4. Q4 Excavations, Formwork, Tools, Equipment and Materials (Specific) 40 marks
5. Q5 Plaster and Screed, Brickwork and Graphics As Means of Communication (Specific) 30 marks
6. Q6 Reinforcement in Concrete, Foundations, Concrete Floors and Quantities (Specific) 40 marks

Instructions to candidates

1. Markers should:  Familiarise themselves with the question and answer before evaluating the responses of candidates.  Always interpret the responses of the candidates within the context of the question.  Consider any relevant and acceptable answer during pre
2. For calculations:  A mark is only awarded if the correct unit is written next to the answer.  If TWO marks are awarded ONE mark is awarded for the answer and ONE mark for the correct unit.  Where the candidate made a principle error e.g. added instead of mu
3. When marking drawings:  The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark.  A member incorrectly drawn but wrongfully repeated in another position will be awarded the mark for the repeated inc

1. Q1 Ohsa, Safety, Materials, Tools, Equipment and Joining (Generic) 20 marks
2. Q2 Graphics As Means of Communication (Generic)
3. Q3 Casements, Cupboards, Wall-Panelling and Quantities (Specific) 30 marks
4. Q4 Roofs, Ceilings, Tools and Equipment, and Materials (Specific) 40 marks
5. Q5 Centring, Formwork, Shoring and Graphics As Means of Communication (Specific) 30 marks
6. Q6 Suspended Floors, Staircases, Ironmongery, Doors and Joining (Specific) 40 marks

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic)1.1 Choose a description from COLUMN B that matches an item in COLUMN A. 20 marks
2. Q2 Graphics As Method of Communication (Generic)FIGURE 2 on the next page shows different drawings that appear on a building plan. 40 marks
3. Q3 Construction Associated with Civil Services, Ohsa and Quantities (Specific)3.1 FIGURE 3.1 below shows a sectional view of a manhole. Study the drawing 30 marks
4. Q4 Cold and Hot-Water Supply, Tools, Equipment and Materials (Specific)4.1 FIGURE 4.1 below shows a geyser. 40 marks
5. Q5 Graphics As Means of Communication, Roof Work and Storm Water (Specific)5.1 Give ONE word(s)/term for EACH of the following descriptions by choosing 30 marks
6. Q6 Sewerage, Sanitary Fittings and Joining (Specific)6.1 Various options are given as possible answers to the following questions. 40 marks

Instructions to candidates

1. This question paper consists of SIX questions.
2. Answer ALL the questions.
3. Answer each question as a whole. Do NOT separate subsections of questions.
4. Start the answer to EACH question on a NEW page.
5. Do NOT write in the margins of the ANSWER BOOK.
6. You may use sketches to illustrate your answers.
7. Write ALL calculations and answers in the ANSWER BOOK or on the attached ANSWER SHEETS.
8. Use the mark allocation as a guide to the length of your answers.
9. Make drawings and sketches in pencil, fully dimensioned and neatly finished off with descriptive titles and notes to conform to the SANS/SABS Code of Practice for Building Drawings.
10. For the purpose of this question paper, the size of a brick should be taken as 220 mm x 110 mm x 75 mm.
11. Use your own discretion where dimensions and/or details have been omitted.
12. Answer QUESTIONS 2, 3.2, 3.6, 5.2, 5.3 and 6.3 on the attached ANSWER SHEETS using drawing instruments where necessary.
13. Write your CENTRE NUMBER and EXAMINATION NUMBER on every ANSWER SHEET and hand them in with your ANSWER BOOK, whether you have used them or not.
14. Drawings in the question paper are NOT to scale due to electronic transfer.

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic)1.1 Choose a description from COLUMN B that matches an item in COLUMN A. 20 marks
2. Q2 Graphics As Method of Communication (Generic)FIGURE 2 on the next page shows different drawings that appear on a building plan. 40 marks
3. Q3 Roofs, Staircases and Joining (Specific)3.1 What is the minimum pitch of a roof when class A corrugated iron sheeting 30 marks
4. Q4 Excavations, Formwork, Tools and Equipment and Materials (Specific)4.1 Choose a description from COLUMN B that matches an item in COLUMN A. 40 marks
5. Q5 Plaster and Screed, Brickwork and Graphics As Means of Communication (Specific)5.1 FIGURE 5.1 below shows a worker plastering a wall. Study the drawing and 30 marks
6. Q6 Reinforcement in Concrete, Foundations, Concrete Floors and Quantities (Specific)6.1 Various options are given as possible answers to the following questions. 40 marks

Instructions to candidates

1. This question paper consists of SIX questions.
2. Answer ALL the questions.
3. Answer each question as a whole. Do NOT separate subsections of questions.
4. Start the answer to EACH question on a NEW page.
5. Do NOT write in the margins of the ANSWER BOOK.
6. You may use sketches to illustrate your answers.
7. Write ALL calculations and answers in the ANSWER BOOK or on the attached ANSWER SHEETS.
8. Use the mark allocation as a guide to the length of your answers.
9. Make drawings and sketches in pencil, fully dimensioned and neatly finished off with descriptive titles and notes to conform to the SANS/SABS Code of Practice for Building Drawings.
10. For the purpose of this question paper, the size of a brick should be taken as 220 mm x 110 mm x 75 mm.
11. Use your own discretion where dimensions and/or details have been omitted.
12. Answer QUESTIONS 2, 3.7, 4.3, 5.2, 5.4, 6.2 and 6.6 on the attached ANSWER SHEETS using drawing instruments, where necessary.
13. Write your CENTRE NUMBER and EXAMINATION NUMBER on every ANSWER SHEET and hand them in with your ANSWER BOOK, whether you have used them or not.
14. Drawings in the question paper are NOT to scale due to electronic transfer.

1. Q1 Ohsa, Materials, Tools, Equipment and Joining (Generic)1.1 Choose a description from COLUMN B that matches an item in COLUMN A. 20 marks
2. Q2 Graphics As Method of Communication (Generic)FIGURE 2 on the next page shows different drawings that appear on a building plan. 40 marks
3. Q3 Casements, Cupboards, Wall-Panelling and Quantities (Specific)3.1 Give ONE word/term for EACH of the following descriptions by choosing a 30 marks
4. Q4 Roofs, Ceilings, Tools and Equipment, and Materials (Specific)4.1 Choose a description from COLUMN B that matches an item in COLUMN A. 40 marks
5. Q5 Centering, Formwork, Shoring and Graphics As Means of Communication (Specific)5.1 FIGURE 5.1 below shows a vertical sectional view through formwork for two 30 marks
6. Q6 Suspended Floors, Staircases, Ironmongery, Doors and Joining (Specific)6.1 Various options are given as possible answers to the following questions. 40 marks

Instructions to candidates

1. This question paper consists of SIX questions.
2. Answer ALL the questions.
3. Answer each question as a whole. Do NOT separate subsections of questions.
4. Start the answer to EACH question on a NEW page.
5. Do NOT write in the margins of the ANSWER BOOK.
6. You may use sketches to illustrate your answers.
7. Write ALL calculations and answers in the ANSWER BOOK or on the attached ANSWER SHEETS as required.
8. Use the mark allocation as a guide to the length of your answers.
9. Make drawings and sketches in pencil, fully dimensioned and neatly finished off with descriptive titles and notes to conform to the SANS/SABS Code of Practice for Building Drawings.
10. For the purpose of this question paper, the size of a brick should be taken as 220 mm x 110 mm x 75 mm.
11. Use your own discretion where dimensions and/or details have been omitted.
12. Answer QUESTIONS 2, 3.5, 5.9, 6.3 and 6.7 on the attached ANSWER SHEETS using drawing instruments, where necessary.
13. Write your CENTRE NUMBER and EXAMINATION NUMBER on every ANSWER SHEET and hand them in with your ANSWER BOOK, whether you have used them or not.
14. Drawings in the question paper are NOT to scale due to electronic transfer.